Stewart Technology Associates Provides Cost Effective Hydrodynamic Analysis And Other Solutions

Stewart Technology Associates Provides Cost-Effective Hydrodynamic Analysis And Other Solutions


Roger SDesign

There is no doubt that in order to ensure that a certain sea-going vessel or structure will perform as it should in a variety of sea conditions and environments, thorough hydrodynamic analysis will be necessary, and for a number of companies and organizations that depend on the integrity of their vessels and structures, the choice for seeking hydrodynamic analysis from Stewart Technology Associates has been a good one.

YouTube Preview Image

Although Stewart Technology Associates is not a tremendously large marine and offshore engineering consultancy solutions firm, this does not deter this established company from providing extremely high quality hydrodynamic analysis and other solutions. Since 1986, Stewart Technology Associates has been driven to provide marine and offshore engineering consultancy solutions which are nothing less than cost-effective and high quality, and this can especially be seen in the efforts performed by this company with respect to hydrodynamic analysis. Aside from having strong leadership and a skilled and dedicated team of professionals, it’s also important to point out that Stewart Technology Associates also employs its invaluable resources, including the powerful software product from Orcina, OrcaFlex, in ensuring that clients receive analysis and design solutions which are simply top-notch and which exceed those of its competitors.

It is no surprise that Stewart Technology Associates has amassed a reputation for providing marine and offshore engineering solutions which are reliable, thorough, accurate, cost-effective, and above all-else, high quality. Hard work, appropriate vision, skill, experience, and top-quality resources have allowed the clients of Stewart Technology Associates, which include major oil companies, drilling contractors, government agencies, financial services companies, and other engineering companies to receive solutions which help them to not only achieve their specific goals, but indeed, to exceed them.

Although Stewart Technology Associates does have a fine reputation for providing hydrodynamic analysis services which are cost-effective and high quality, this Houston-based marine and offshore engineering company is also capable of delivering equally high quality solutions in other areas. Indeed, high quality riser analysis and design, mooring design and analysis, accident investigation, marine litigation assistance, jack-up analysis and design, and other solutions can be provided by Stewart Technology Associates, and if you would like to find out more regarding the hydrodynamic analysis or other solutions provided, then simply contact Stewart Technology Associates directly by phone or email. Also feel free to learn more by continuing to browse through the rest of the Stewart Technology Associates website.

Stewart Technology Associates, also known as STA is an independent marine and offshore engineering consultancy firm based in Houston, Texas. This company has been providing high quality consultancy services to a range of organizations, both domestic and international, and operating in both the public and private sectors, and through STA’s expert knowledge, experience, resources, and dedication, this firm has managed to enjoy a great deal of success over the years. If you would like to find out more regarding any of the high quality marine and offshore engineering services currently being offered by Stewart Technology Associates, please visit or contact Stewart Technology Associates directly.

Article Source:

Bad Credit Mobile Home Refinance Loans 7 Easy Steps To Qualifying

By Robbie T. James

Mobile home owners know the pride and joy of home ownership. There is also a certain special kind of freedom in owning a mobile home that you may not find through ownership of a traditional home. With a mobile – or modular – home, you can relocate your home anytime you like.

As with any homeowner, you want to get the best rate you can on a mortgage. It is quite likely that if you took out your mortgage more than a year or two ago, you can now qualify for a lower interest rate than you could at that time. That is because average mortgage rates are much lower than they have been for a long time.

Of course, the other important factor in determining the rate you can qualify for is your credit score. If you have bad credit, you may be reluctant to apply for a refinance loan for your mobile home. After all, it is no fun to get rejected due to having less-than-perfect credit.

Still, it is worth trying for – especially if you know what steps to take. That is because, even the chance to save 1-2% on your interest payments could means thousands less in mortgage payments. And, that’s more money in your own pocket.

If want to save cash by refinancing your mobile home, follow these 7 easy steps to qualifying for a bad credit mobile home refinance loan:

1. Determine how much extra cash flow you need each month after refinancing:

YouTube Preview Image

How much extra cash flow do you need each month? If you need to save one hundred dollars or more per month in mortgage payments, you definitely will want to try for a lower interest rate.

2. Decide whether you want to extend your loan to a longer term:

Another factor to consider that could lower your payments is the repayment term (period) of your loan. When you refinance, if you can consider taking out a loan with a longer repayment term. This will mean lower monthly payments right off the bat, even though it could mean paying more in total interest charges over time.

3. Find out or estimate how much your mobile home is worth today:

Next, it is time to figure out how much your home is worth today. Get it appraised or ask a local realtor to send you a list of comps showing the recent selling price of similar homes in the area.

4. Look up your credit score:

Pull your credit score from the three big credit tracking bureaus, namely: Equifax, Experian, and TransUnion.

5. Figure out what interest rate you are currently paying on your mortgage loan:

Get out your mortgage agreement for your current loan and calculate how what your interest rate is. That is the number to beat.

6. Put together a list of potential refinance lenders who specialize in working with bad credit individuals:

Next, compile a list of “bad credit mortgage refinance lenders”; make sure you have at least five lenders on your list. Check out their websites and do a bit of additional online research to make sure that each one is reputable.

7. Apply for a refinance loan to three or more lenders:

Be sure to apply for a refinance loan to at least three of the lenders. The more applications you submit, the better chances that you will be offered the lowest-possible rate.

Keep an eye on the closing costs that you will have to pay. Make sure that the monthly savings you realize from refinancing justifies your paying the closing costs. To calculate this, just divide the closing costs by the difference in monthly payments between your current and new loans.

Follow these 7 easy steps to qualify for a bad credit mobile home refinance.

About the Author: Get a list of bad credit mobile home refinancing lenders at:

Mobile Home Refinancing Lenders



Permanent Link:

Cordless Hammer Drill Versus Cordless Rotary Hammer Drill

By Jeffrey Richard

Anytime someone drills concrete, they will reach for what they call a hammer drill. But they could be talking about two totally different tools. So, when you are looking for a cordless hammer drill, you will want to know the differences.

A cordless hammer drill, usually looks like a conventional cordless drill with a three jaw chuck. Usually on the selector knob, you will see a picture of a hammer. Obviously, this is the position you would use for hammering. Cordless hammer drills accomplish hammering via gearing. These tools use a straight shank carbide tip drill bit. When you use these tools, you hear the distinctive whining sound.

These tools are excellent for drilling smaller holes, is a good top end all though they will do a 3/8 here and there and they do make bits up to 1 to fit these tools but trust me, their best range is and under. You may use this tool if you only drill masonry once and a while. Many contractors use cordless hammer drills for installing tapcon anchors. But again, if you are setting anchors or need to drill longer or bigger holes, you owe it to yourself to try a cordless rotary hammer drill.

YouTube Preview Image

If you go on to any commercial job site, you will see cordless rotary hammer drills in use. While the cordless hammer drill has that distinctive whine, rotary hammers have a lower tone and you can actually hear the bit hammering. Rotary hammers are actually have a pneumatic hammering system, the tool turns slower, but hits much harder than a cordless hammer drill. The bits for this tool are referred to as sds or sds bits. The shank of the bit is about 3/8 of an inch with two dimples and two grooves. You dont chuck them in, you just snap them into the tool.

Like the cordless hammer drill, the cordless rotary hammer does well with the smaller bits. The interesting thing with the smaller bits is that the bits will actually last quite a bit longer as the tool doesnt heat up the carbide because it spins slower. When it comes to drilling holes larger than , the rotary hammer will blow away the cordless hammer drill. Many of these cordless rotary hammers are rated for up to 1 and thin wall core bits. Some of them can even turn off the rotation and you can insert a chisel. You wont believe how hard these tools can hit!

Now that many of these cordless rotary hammers have gone to lithium, they are going to 36 volts. Talk about a must have these things have great power, run time and are lightweight.

Keep these simple points in mind when deciding what kind of cordless hammer to by. The cordless hammer drill, in my opinion is really just a tool for the smaller holes. Remember that is my opinion based on what I have seen in the trades over the last 15 years. Even if you are just drilling the smaller holes, give a cordless rotary hammer drill a try. You really wont believe how effortlessly they can drill masonry material.

About the Author: Jeffrey Richard has been selling all types of power tools including hammer drills to the trades for over 15 years. If you are looking for a

cordless hammer

check out


Permanent Link:

Escrow Accounts Are You Paying Too Much?

By Yuri Szilasi

Are You Paying Too Much Escrow?

Many people are paying more than they need to into their escrow accounts. A simple check of your own account can save you thousands in interest over the course of your loan.

Money in escrow is “dead money”. It doesn’t earn interest for you and it doesn’t reduce your mortgage interest payments. Therefore every cent in your escrow account is costing you money. Make sure there is no more tied up in escrow than there needs to be!

Here is a brief summary of what lenders can and cannot do regarding escrow. I’ll also explain how to check your own escrow account to make sure you are not paying too much. It’s very simple to do and could save you thousands over the course of your loan.

State laws vary; you should consult your own attorney to determine what your local laws allow.

The way lenders handle escrow is regulated by the Federal Real Estate Settlement Procedures Act, which applies to all “federally related mortgage loans”.

Unless local law says otherwise, at settlement the lender can require a borrower to deposit funds in an escrow account set up for the payment of taxes or insurance premiums. The sum deposited cannot exceed the actual amount of the taxes and premiums, plus one-sixth of their estimated total.

YouTube Preview Image

If the taxes come due in January and you are settling in July, your first month’s payment will be due Sept. 1. For September, October, November and December, you will make four months’ escrow payments. Since the lender will require a full year’s payment in January, and at that time only four months’ payments will be in escrow, the lender can escrow eight months at settlement, plus one-sixth of the total amount, which amounts to an additional two months’ worth of escrow.

Thus, at settlement, do not be surprised if the lender requires you to pay 10 months’ tax payments into escrow. These funds are held by the lender and paid when the taxes come due.

The rules apply until you pay off your loan. In other words, the lender can hold two additional months’ escrow, so that if you are delinquent in one or two monthly payments, the lender will still have sufficient funds.

At least once a year, the lender that services your loan must send you a statement clearly itemizing “the amount of the borrower’s current monthly payment, the portion of the monthly payment being placed in the escrow account, the total amount paid into the escrow account during the period, the total amount paid out of the escrow account during the period for taxes, insurance premiums .. . (as separately identified) and the balance in the escrow account at the conclusion of the period.”

When you receive this statement, you should review it carefully. Confirm with your taxing authority and your insurance company exactly when the payment is due and the amount of the payment. Use a calculator to determine whether the lender has properly calculated the amount of the escrow. Congressional testimony has uncovered many errors made by mortgage lenders.

There are also many cases in which lenders fail to pay the real estate tax on time – or at all. Often, the first time that homeowners learn of this non payment is when they receive a notice of tax sale from the jurisdiction where their property is located.

If you are required to escrow for taxes and insurance it is a very good idea to write to your lender annually, demanding proof of payment of the real estate taxes and insurance premiums. If the lender does not respond promptly, contact your taxing authority to confirm payment of the taxes, and complain about the lack of response to your state or local financial regulatory authority.

Home owners who have 20% or more equity in their property – that is, if they borrow or refinance 80% or less than the value of the property – have the right to receive a notice from the lender that they may pay their own taxes and insurance without escrow. This is a wise thing to do as your money is better off working for you than sitting in a non interest bearing escrow account. This is of course providing that you have the financial discipline to have the funds available when it comes time to pay your taxes and insurance!

WARNING: Some lenders try to increase the mortgage rate when the borrower opts to avoid escrow. You should talk to your attorney who will likely advise you it is illegal for the lender to do this. Again, MAKE THE EFFORT. It can be worth a great deal of money to you in the long term.

Unfortunately, escrow for taxes is a way of life in the mortgage industry. However, as a borrower, you have the right to review and analyze – and complain if you find that your escrowed funds are not being handled properly. After all, this money belongs to you until it is paid to the taxing authority or the insurance company.

You can easily check your own escrow account.

To determine whether your escrow account balance is excessive, divide all annual expenses paid out of that account by 12.

For example, if your annual expenses are $1,200, the lender would need $100 a month for payments.

If your monthly escrow payment is significantly higher than $100, the lender may be overcharging. Some lenders establish separate escrow accounts for each item to be paid, rather than making all payments out of the same fund. But regardless of the method used, at some point in the year, there should be no more than two times the monthly payment in the account (in the above example there should be no more than $200 in the account for at least one month of the year), or a smaller amount if the mortgage contract specifies one.

Should you find that you are being excessively charged you need to contact your lender for a satisfactory explanation because THIS IS COSTING YOU MONEY.

$500 in your escrow account is $500 that is not coming off your mortgage. You are paying interest on this which over the years can compound out to significant amounts of money. In fact over a 30 year loan at 8% this $500 will have cost you $5,431.92 in additional interest. Is that worth fighting for?

I encourage you to make the small effort required to monitor your accounts. It’s so easy to be complacent and assume that all is as it should be. TAKE RESPONSIBILITY for your finances. When it comes to your money, you are the only person you can really trust.

About the Author: Yuri Szilasi is the owner of

a site dedicated to recouping mortgage overcharges from lenders. Mortgage overcharges are endemic worldwide and cost Americans alone over $8 Billion each year.


Permanent Link: